Kromschroder Burner Control BCU 570

Burner control unit BCU 570 controls, ignites and monitors industrial individual burners and forced draught burners of unlimited capacity in intermittent or continuous operation. It can be used for directly ignited burners or burners ignited by a pilot burner.

An integrated Manual mode allows the manual activation of the burner control units and adjustment of the butterfly valves.

The fan output and the actuator and valve outputs which are checked for faults are accommodated in a plug-in power module. If necessary, this module can be replaced with little effort.

The BCU can be installed on a DIN rail in the control cabinet. The plug-in connection terminal strips make it easier to install and remove.

The external operator-control unit OCU is available as an option for the BCU. The OCU can be installed in the control cabinet door instead of standard control units. The program status or fault messages can be read on the OCU. For burner adjustment, the operating points can be approached conveniently in Manual mode using the operator-control unit.

  • EU certified
  • It is installed on a DIN rail in the control cabinet
  • Flame control with UV sensor or ionization sensor
  • Mains voltage: 230 V, 50/60 Hz or 120 V, 50/60 Hz

For 230 V AC, modulating with IC interface, connection plugs with screw terminals : BCU 570WC0F1U0K1-E
For 230 V AC, modulating with RBW interface, connection plugs with screw terminals : BCU 570WC0F2U0K1-E

* * For other configuration or spare parts, please consult JATI