Kromschroder Impulse System MPT 700
19″ module for converting a controller signal to pulse cycles for gas burners. This intermittent operation circulates the atmosphere in the oven or kiln and thus achieves a uniform temperature distribution and a shorter heat-up time on all gas-fi red heat-treatment ovens.
Eight different operating modes can be programmed on the MPT 700. For instance, it is possible to increase in temperature accuracy and achieve controlled cooling via the air valves in Heating and Cooling mode. The pollutant emissions are reduced by optimum burner operation On/Off or High/Low. The impulse system can control one or two zones with up to eight outputs. One or more burners can be connected per output.
- Energy saving
- Reduced pollutant emissions
- Single or two-zone operation
- For continuous controllers, three-point step controllers or manual operation
- Linear ratio between controller signal and burner capacity
- High operating convenience
- Complies with the Low-Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC
* * For other configuration or spare parts, please consult JATI
